Input voltage: DC 10-28V, 30V max.
Input Current: 25A maximal
Charge current: 0.1-20A, 500W max.
Discharge Current: 0.1-10A, 35W max.
Accuracy of the cell voltage: -5mV/+5mV
Balance current: 1.3A per cell (for LiPoly, Li-ion and LiFePO4 battery pack)
Battery Type: LiPoly, Li-ion, LiFePO4, NiMh/NiCd, Pb acid(VRLA) battery pack
Li-ion battery: 1-6S
LiPoly battery: 1-6S
LiFePO4 battery: 1-6S
NiMH/NiCd battery: 1-20S
Pb battery: 1-12S
The terminal voltage per cell can be set up to 4.35V only for HV LiPo battery.
NiMh/NiCd cell count is identified automatically Mechanical Characteristics:
Size:154*114*33 (L×W×H, mm) or 6.1×4.48×1.3 (L×W×H, inch)
Input power cable: AWG14 wire, 600mm length
Charger unit: 1pcs
Power cable: 1pcs, AWG14 wire, 320mm length with 4mm gold male connector
USB data line: 1pcs
Temperature sense lead: 1pcs
adapter wire: 1pcs
adapter board: 1pcs
Output wire 320mm, with banana plug on one side
Version History - Firmware
V1.03 First released
V1.06 Add IR detection, Optimize menu and simplify operation, Adjust LCD contrast
V1.07 For LiHV battery, the terminal charge voltage is 4.44V
V1.08 Press START don?t stop program operation, On storage, add charge current and discharge current setup, Program operating done, LCD back light resume ON, Maximal power increase to 505W, Optimize IR detection.
V1.08T Add LiTo battery type
V1.09T Fix a bug when pre-charge LiTo battery
V1.10T Fix a bug on cycle mode
V1.11T Optimize back ground and text color
V1.12T Add the SN number on charger setting interface
|Unsere WEEE-Reg.-Nr:||DE 36345768|