Isolated 4 port USB to TTL UART FTDI
JST XH connector soldered
Transparent sleeve loose in the package or mounted on the board
What makes it special?
Each port has the digital isolator. The computer and your target board are electrically isolated.
The 4 ports can work at different voltages and the ground is not in common.
The noise coming from your computer doesn’t enter in your target board, this can be useful when you are working with sensible analog circuit.
The voltage levels of TX and RX are the same of your target board. This means that it doesn’t matter if your board is working at 5V or 3.3V or 1.8V, the logic levels are always correct!
Technical data:
Original FTDI FT4232H-56Q
Up to 12Mb/s each port
Size of 55 x 50mm
The PC will see 4 different COM ports
MAX12931BASA+ or ADUM121N1BRZ isolator
3kVrms digital galvanic isolators
Each ports can work independently at 1.8V up to 5V
Tested in a climatic chamber from -20°C up to 80°C
Power, TX and RX LEDs indicators
USB type-C connector
Optional transparent heat shrink sleeve
Optional pin header of JST XH connectors
Working under: Linux, Windows, Android and Mac OS
optional Accessory:
VE.Direct Cable 1m or 2m or 5m
USB A to USB C cables in different length
Pinout:
Name |
Description |
Direction |
Voltage level |
+ |
Positive power supply |
Input |
1.8V – 5V |
– |
Ground |
Input |
0V |
RX |
UART RX |
input |
same of + |
TX |
UART TX |
output |
same of + |